Waler Plates are part of the Tie Bar System: Specially designed for securing formwork. Waler Plates work with Wing Nuts to help spread the load of the Tie Bar into the supporting steel or timber struts, preventing damage and failure of the formwork. This system is primarily used to hold shuttering firmly in place when constructing concrete walls.
Dimensions 120mm x 120mm x 10mm. For use with 15mm Wing Nuts.
Waler Plates are used in conjunction with Tie bars. Manufactured from hot rolled high tensile steel Tie Bars have a coarse thread specifically designed to be resilient to the rigours of the construction site. This thread runs along the whole length of the bar, allowing it to be cut or coupled at any point. During assembly of the formwork the Tie Bar is held in place by using the specially designed large Wing Nuts and large square washers called Waler Plates. The bars are slid through PVC Thruty Sleeves. Once the concrete has cured the bars are easily removed from the concrete structure to be reused. To create neat chamfered edges to these holes on the concrete structure, specially designed Thruty Cones are positioned on the ends of the Thruty sleeve while setting up the formwork. The Thruty Cones are removed once the concrete has cured. To create a smooth watertight finish, Flupp Plugs are placed in the holes and a watertight repair is achieved with the use of Tie Plug Cement.
We Stock 15mm Tie Bars in up to 6 metres in length, Waler Plates, Wing Nuts, Tie Bar Connectors, Thruty Sleeves, Thruty Cones, Tie Plug Cement, and Flupp Plugs, everything you need to secure your formwork. Should you require tie bars at specific lengths, we offer a cutting service.
Note: All these products are available for next day delivery if ordered before 1PM. (except tie bar cutting service).
We Can Help! Call our team of friendly experts on 01268 571571 or email us at [email protected] and let us help you choose the reinforcement and accessories your project requires.
Material | Steel |
---|---|
Manufacturer | No |