Cellform is similar to Groundform but combines with Cellcore & Claymaster to create a permanent shuttering system with all the benefits of groundheave solutions in one. The Cellcore element comes already fitted to the bottom of the Groundform whilst the Claymaster is attached to the vertical side of the Cellform on site.
Cellform HX combines the benefits of Cellcore HX B with an economical and simple to install permanent formwork system. Each Cellform HX panel is supplied to the required beam width and depth, allowing them to be quickly installed with the range of accessories available.
The principle of Cellform HX is that the hinged side panels are supported off the reinforcement cage by concrete spacers, which then allows the excavation to be backfilled. The backfill then supports the formwork against the concrete pressure whilst the beam is cast and thereby avoids the need for fixing and striking traditional formwork.
The Cellform HX range is designed for use as a combined ground heave protection and permanent formwork system for the construction of ground beams.
|Material||Polypropylene & Polystyrene|